ENGINE PROTECTOR

Small & Medium Size Engines

What is King’s ART –The ultimate Engine Restoration Fluid:
ART is an acronym for Automotive Restoration Technique – this is the top of the line, just like a King is, engine restoration fluid.

It is a cermet material (Metal-Ceramic compound). When this fluid squeezes between high speed moving parts operating at high temperature (between 1000 – 1200 degree C), it develops a magnetic property and starts depositing itself on the moving machine parts. The deposit starts at the most depressed surface area and gradually covers the entire area. It automatically ceases further deposits when metal surface reach high degree of smoothness.

 

For Engines (Gasoline/Diesel/Ethanol/CNG): King’s ART is most suitable for all fuel engines, especially for those engines where relatively large gaps develop between the piston and the cylinder due the friction and the high temperature. Interestingly, King’s ART works best under those operating conditions.

  • Automatically repair the worn parts of the engine, and restore the prototype size
  • Extend engine service life more than 2 times
  • Extend the car-driving mileage, less overhaul.
  • Saving fuel consumption 5-20%
  • Extend the engine oil change interval 2-3 times
  • Reduce exhaust emissions by 20-50%
  • Reduce friction, self-repairing layer of dry friction coefficient of 0.007
  • Improve the acceleration of the engine power by 5-25%
  • Eliminate engine carbon deposits and glial fouling
  • Eliminate engine cold-starting wear
  • Reduce engine failure rate.

“Engine Protector”: Adding Method for small and medium-sized engines

  • To discharge all used lubricating engine oil; replace the engine oil filter and to clean centrifugal filter
  • To inject new and fresh lubricating engine oil.
  • To start the engine into the hot running idle state.
  • To inject Kings ART lubricating fluid into engine oil tankers.
  • To continue the engine running in idle state for 20 minutes.
  • To turn the engines into normal running speed.(in case, engine is seriously worn, second adding is proposed when driving 500 km after 1st adding for the full worn-surface recovery. Note: no need to change the engine oil in 2nd adding.)
  • For auto-vehicles, second round adding after driving 200,000 -300,000kilo meters.
  • After adding of ‘Engine Protector’, It is suggested to change engine oil every 20,000km. (For initial engine oil change, it is suggested to change engine oil after 10-15 thouand km driving).

Precautions

  • ART Product can only be used after change of used engine oil and engine oil filter.
  • When engine parts are seriously worn, cylinder pressure fell down to 75% and/or aging of the valve stem seals, engine oil burning, etc., engine maintenance is required before using this ART product.
'Engine Protector'

“Engine Protector”, the name given by our Company, is one of special products for the wear recovery of all types of engines by using with gasoline, diesel, heavy oil. "Engine Protector" also can be used as "abrasives" for all new engines.

Product Efficacy:

  • Automatically re-conditioning the worn parts of the engine, and restore the prototype size.
  • Prolong engine service life more than twice.
  • Extend engine overhaul running mileage.
  • Save 5-20% fuel consumption.
  • Extend the engine oil change interval 2-3 times.
  • Reduce exhaust emissions by 20-50%.
  • Improve the engine power by 5-25%; improve the speed acceleration.
  • Eliminate engine carbon deposits and glial fouling.
  • Eliminate the wear and tear of the engine cooling action.
  • Reduce engine noise.
  • Improve the compression power; recover cylinder vacuum.
  • Reducing engine failure rate.

'Engine Protector' Product Category for auto-vehicles:

  • 20ml/bottle: motorcycle.
  • 80ml/bottle: Small cars, mini vehicles
  • 120ml/bottle: Small vans and big cars
  • 200ml/bottle Ordinary vans, buses, trucks
  • 250ml/bottle Heavy-duty vehicles, mining vehicles, big engines.
Locomotive

The Product automatically repairs the worn parts of the Locomotive Diesel engine, Gear Boxes, and restores the prototype size, which extends engine service life more than two times.

Application in The Diesel Locomotive Other components:

Radiator Fan, Drive Shaft, Air Compressor, Truck Frame, Motor Blower, Traction Motor, Penion & Gear Wheel.

  • Automatically repair the worn parts of the engine, and restore the prototype size.
  • Extend engine service life more than 2 times.
  • Saving fuel consumption.
  • To extend the engine oil change interval 2-3 times.
  • Reduce friction, self-repairing layer of dry friction coefficient of 0.007.
  • Improve engine house-power, 5-25%.
  • Reduce engine vibration and noise.
  • Improve locomotive Online rate.

Engine Protector: Adding Method for the Diesel Locomotive

  • To discharge all used lubricating engine oil; replace the engine oil filter and to clean centrifugal filter.
  • To inject new and fresh lubricating engine oil.
  • To start the engine into the hot running idle state.
  • To inject Kings ART lubricating fluid into engine oil tankers.
  • To continue the engine running in idle state for 20 minutes.
  • To turn the engines with normal running speed.

Precautions

  • ART Product can only be used after change of used engine oil and engine oil filter.
  • When engine parts are seriously worn, cylinder pressure fell down to 75% and/or aging of the valve stem seals, engine oil burning, etc., engine maintenance is required before using this ART product.
Big Engine

The Product automatically repairs the worn parts of the engine, and restores the prototype size.

  • Automatically repair the worn parts of the engine, and restore the prototype size.
  • Extend engine life more than 2 times.
  • Saving fuel consumption.
  • To extend the engine oil change interval 2-3 times.
  • Reduce friction, self-repairing layer of dry friction coefficient of 0.007.
  • Improve engine house-power, 5-25%.
  • Reduce engine vibration and noise.
  • You improve large engine online rate.

Engine Protector: Adding Method for the Diesel Locomotive

  • To discharge all used lubricating engine oil; replace the engine oil filter and to clean centrifugal filter.
  • To inject new and fresh lubricating engine oil.
  • To start the engine into the hot running idle state.
  • To inject Kings ART lubricating fluid into engine oil tankers.
  • To continue the engine running in idle state for 20 minutes.
  • To turn the engines with normal running speed.

Precautions

  • ART Product can only be used after change of used engine oil and engine oil filter.
  • When engine parts are seriously worn, cylinder pressure fell down to 75% and/or aging of the valve stem seals, engine oil burning, etc., engine maintenance is required before using this ART product.